Saturday, November 24, 2012

"Heavy Metal"- 6N7 metal valve preamp

In a box of very old valves, I was given recently, was a new looking pair of black metal can RCA 6N7s. These are dual triode with a common cathode. I could find no schematic for a preamp but a DIY buddy came up with a design. Construction is in a timber box. There are three switchable inputs and power is supplied by an external 18V 2.2A AC power pack I was also given. Internally 255V is developed with a linear PS and regulated 12V for the heaters in series.

An Alps blue velvet pot is fitted to the output for attenuation with a fine solid brass knob to compliment the gold right-angle RCAs, name plate and ventilation holes. Wire Warp wire is used in the signal path with PS and amp on separate brds. No PCBs or shielded wire is used. Bitumanised heavy Al foil lines section of the preamp for resonance control.

The preamp is dead silent at idle with stunning drama and dynamics. It's fast, crisp, clean and makes every track sparkle. Best preamp I have ever built, SS or valve based. Nothing comes close to this one. Nothing!


Anonymous said...

Can you post a schematic?

retro-thermionic said...

here is a link to the diyaudioprojects where you can find the schematic. You do have to register with the forum but it is a great site to be a part of: